-
Set IP address from the front panel
-
Remote printer setup
-
Firmware flash upgradeable
-
802.11b wireless ethernet interface
available as an option
-
Genicom ANSI emulation
-
Increased available memory
-
Two-line display
-
Auto-switching power supply —
can work domestically and internationally, and it weighs
less!
-
Tractor System. The FormsPro
4500se has a single set of straight-up tractors. The
FormsPro 4503se has the Tri-Trak System with three sets of
straight-through tractors.
-
High-Speed for High-Volume Printing.
With a draft speed up to 530 cps, FormsPro printers can
print a typical 1,000 character document in less than five
seconds. That's over 700 documents per hour!
-
Waste-Free Forms Tear-Off.
After you tear off a form, the next is automatically
positioned for printing.
-
Superior Legibility-Even on 9-Part
Forms. Auto-Gap feature adjusts the printhead
according to form thickness.
-
Trouble-Free Forms Handling.
Easy-Load tilt-up top simplifies loading, and straight-up
paper path eliminates the problem of forms buckling and
jamming. Paper jam sensor permits reliable, unattended
operation.
-
Automatic Page Edge Sensor.
Optical sensor prevents printhead from printing beyond the
edges of the loaded form.
-
Stores Parameters for Up to 10
Forms. Spacing, margins, font and 11 other
parameters are set using four front panel buttons. Options
are displayed on a 2x16-character LCD display. Once you've
set the parameters for a form, they can be stored and
recalled at any time.
-
Ruggedly Built for Reliable
Operation. FormsPro printers are designed to
withstand 100% duty cycles. The printhead carries a
two-year limited warranty when used in combination with a
Printek brand ribbon - longer than any printhead in the
industry. A one-year warranty is offered if a non-Printek
brand ribbon is used.
Fax:
251.865.0782